650L Double Planetary Power Mixer for Power Battery Slurry

• Customization: Available
• Additional Capabilities: Coating
• After-sales Service: Life Time Service
• Model NO.: Double Planetary Mixer
• Application Area: Chemical
• Certification: CE, ISO
• Condition: New
• Stirring Type: Twist Frame
• Working: High Speed Mixer
• Automatic Grade: Automatic
• Best Quality: Low Cost
• Can Be Customized: Easy to Clean
• Widely Use: with CIP Clean System
• Mixer Type: Planetary Mixer
• Layout Type: Verticle
• Mixing Drum Shape: Double Cone
• Operating type: Continuous Operating
• Warranty: One Year
• Transport Package: Wooden Box Pachage
• Specification: GMP ISO9001
• Trademark: Li&Li
• Origin: China
• HS Code: 8479820090
• Production Capacity: 200PCS/Month
• Package Size: 3900.00cm * 1800.00cm * 3600.00cm
• Package Gross Weight: 11000.000kg

Product Description

Product Introduction

     The planetary power mixer is a new all-powerful machine, which combines the principle of traditional double planet mixer and high speed dispersion machine, and has been widely used in many fields.
     For the characteristics of high solid content and large viscosity of power battery slurry, our company has developed an enhanced power mixer with higher speed and greater torque on the basis of the proto-planetary power mixer. In the design process, fully consider the speed of the agitator, stirring power, dispersion linear speed, suspension grade, liquid flow pattern and the distribution of turbulence intensity in the barrel and other factors, the highest high-speed dispersion linear speed can reach 23m/s, the enhanced twist frame can handle any high viscosity battery slurry. The new mixing method - the twist frame rotates clockwise and turns counterclockwise to ensure that the mixing has no dead Angle and no "climbing" phenomenon. In terms of sealing, two sets of mechanical seals plus soft and static seals ensure vacuum - in theory, the sealing performance is enhanced by 30%. The Pt100 temperature sensor is in direct contact with the material, the measurement is more accurate, the reaction speed is faster, and the error is only between ±0.5ºC. This machine is composed of base, beam, column, seal cover, cylinder, transmission and electric control system.

 

Equipment Configuration

Name	Type specification	Brand origin
Reducer	RF168-V55-4P-58.51-B5	China
Motor	Low speed 45KW-4 level, 1 set; High speed motor 55KW-4 level, 1 set	China
Converter	45KW*1 set, 55KW*1 set	VEICHI
Touch Screen	10 inch touch screen, touch screen can run normally, according to actual needs can also omit some steps to run	VEICHI
PLC	By Design Requirements	VEICHI
Platinum Thermistor	Material: stainless steel; Measuring temperature: -50 degrees to 280 degrees; Thermal reaction time: 0.3s; measuring accuracy:1°	HTC
Bearing	By Design Requirements	Germany FAG/HRB
Linear Guideway	Four HGW55CA, Class C accuracy	Hao Chen
Framework Oil Seal	Fluoroplastic skeleton oil seal	NAK/YSDA
Electrical Apparatus Element	Low-voltage electrical components	Schneider Electric
Valve	According to the drawing	ANIX
Mechanical Seal	Two sets of mechanical seals	Chesterton
Gear	Using 20CrMnTi vacuum treatment, tooth surface carburizing hardening processing precision grinding, using bevel gear transmission	OWT
Lubricating Grease	High speed bearing special grease temperature 600 degrees	Bester

 

Product Specifications

vacuum degree	-0.098Mpa  Vacuum pressure holding: no less than -0.085Mpa for static 2 hours
Structure	Gantry type
RPM r/min	Revolution: 0~25r/min  Rotation: 0~42r/min (frequency control of motor speed);    High speed: 0~1950r/min (frequency control of motor speed), speed change can be corrected
Low Speed Shaft	Two axis twist type
High Speed Shaft	Dual dispersion axis, two Φ230 dispersion disks on each axis
Lifting Mode	Linear guide cylinder hydraulic lifting     Hydraulic motor: 3.7KW
Lifting Height	900mm
Temperature Measurement Method	Barrel wall temperature measurement
Tank Body Positioning	The cylinder body is positioned with a circular body positioning block, and the kettle cover is provided with a flange structure to ensure the center positioning
Total Power (KW)	104kw
Power Supply	AC: 3*380V, 50HZ
Dimensions	Length: 2400 Width: 1450 Heigth: 2750   (mm)
Weight  (kg)	About 10500kg

 

Dimension parameter

Tank Size (mm) (I nner diameter *  Internal height)	Φ1100×850 (Inner 300 mesh polishing, outer 200 mesh polishing)
Volume (L)	807L
Design Pressure  (Mpa)	Inner tank: -0.098Mpa  Jacketed: 0.8Mpa
Design Temperature (°C)	-10~+200°C
Tank Body Thickness(mm)	Inner tank: δ8mm (Measured thickness after processing)  Jacketed: δ6mm.
Temperature control form	1.5 inch in and out of water cooling, tank body, tank bottom with jacket, increase the cooling or heating area
Moving Method	Manual operation
Temperature Measurement Form	Tank wall temperature measurement, signal quick plug transmission to temperature controller display temperature

 

Our Advantages

1. We are a direct manufacturer and our priority is your complete satisfaction.
2. Logo printing: We can print any logo as per your requires on the case.
3. We take care of each order from start to finish. All emails will be answered in 1 day
4. No matter what's your order quantity, we will offer the same attention to our quality and service
5. Delivery & lead time: All delivery methods are acceptable, and our lead time is quite short. Usually, our lead time around 7 days, depending on the quantity.
6. Packages: Available for ploy bag or carton box
 

Company Profile

Li&Li Mechanical (Guangzhou) Corporation is a professional and experienced corporation that mainly occupied in design, manufacture, installation and debugging of coating, chemicals, cleaning good, pharmacy, new energy, Oil&Gas engineering, daily use, food, etc. equipment. Enterprise strictly execute the ISO9001 standard management, It has obtained 33 national patents for inventions and practical new types, and has obtained the D1.D2 pressure vessel manufacturing and pressure pipeline installation qualification issued by the National Quality Inspection Bureau. Our products include: all kinds of Reactor, high-speed dispersers, mixing tanks, condensers(heat exchanger), recycling towers, weighing control systems and other complete sets of automation control equipment, at the same time,  customize all kinds of special-shaped equipment for customers.

Our branch located Chongqing will start product by the end of 2023

 

Our Projects

Certifications

If you have any questions or are interested in our products, please don't hesitate to contact us!